This paper explores the application of nanosized, sintered, non-stoichiometric CeO2 with six dopants Ce0.8Nd0.0025Sm0.0025Gd0.005Dy0.095Y0.095O2-delta (CNSGDY), synthesized via modified glycine-nitrate procedure (MGNP) and room temperature self-propagating reaction (SPRT) for fuel cells. The composition, microstructure, and morphology of CNSGDY samples were analyzed using XRD, Raman spectroscopy, SEM, and EDS. The concentration of O2- vacancies, enabling the improvement of ionic conduction, was measured by the deconvolution procedure of additional Raman modes (250 cm-1 (2TA), 560 cm- 1 (2LA) and 610 cm-1 (2TO)) and total values for MGNP and SPRT CNSGDY were 15.89% and 16.06%, respectively. Electrochemical performance assessed through EIS ((Electrochemical Impedance Spectroscopy) in the 550-700 degrees C range revealed a maximum power density of 55 mWcm- 2 at 700 degrees C with SPRT electrolyte. Additionally, the ionic conductivity of the samples was calculated, with the SPRT sample showing superior performance due to higher ionic conductivity values. Differences in power densities between Pt/SPRT/Pt and Pt/MGNP/Pt cells suggest electrode-electrolyte interface and film thickness impacts, guiding future research.

Multidoped CeO2 single-phase as electrolyte for IT-SOFC

Basoli, Francesco;
2024-01-01

Abstract

This paper explores the application of nanosized, sintered, non-stoichiometric CeO2 with six dopants Ce0.8Nd0.0025Sm0.0025Gd0.005Dy0.095Y0.095O2-delta (CNSGDY), synthesized via modified glycine-nitrate procedure (MGNP) and room temperature self-propagating reaction (SPRT) for fuel cells. The composition, microstructure, and morphology of CNSGDY samples were analyzed using XRD, Raman spectroscopy, SEM, and EDS. The concentration of O2- vacancies, enabling the improvement of ionic conduction, was measured by the deconvolution procedure of additional Raman modes (250 cm-1 (2TA), 560 cm- 1 (2LA) and 610 cm-1 (2TO)) and total values for MGNP and SPRT CNSGDY were 15.89% and 16.06%, respectively. Electrochemical performance assessed through EIS ((Electrochemical Impedance Spectroscopy) in the 550-700 degrees C range revealed a maximum power density of 55 mWcm- 2 at 700 degrees C with SPRT electrolyte. Additionally, the ionic conductivity of the samples was calculated, with the SPRT sample showing superior performance due to higher ionic conductivity values. Differences in power densities between Pt/SPRT/Pt and Pt/MGNP/Pt cells suggest electrode-electrolyte interface and film thickness impacts, guiding future research.
2024
Sintering; Electrical conductivity; CeO2; Fuel cells
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0167273824001930-main-2.pdf

solo utenti autorizzati

Tipologia: Versione Editoriale (PDF)
Licenza: Copyright dell'editore
Dimensione 1.88 MB
Formato Adobe PDF
1.88 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12610/80348
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 0
social impact